How to Tell What Model 1949 Marlin 336
| Marlin Model 336 | |
|---|---|
 Marlin 336W in .30-30 Winchester | |
| Blazon | Lever-action rifle or carbine |
| Place of origin | United states of america |
| Production history | |
| Designer | L.L. Hepburn, T.R. Robinson Jr. |
| Designed | 1948 |
| Manufacturer | Marlin Firearms (until 2010), Remington Artillery (almost contempo production) Purchased by Ruger in 2020 (currently out of production) |
| Produced | 1948-2020 |
| Variants | currently: Palatial, BL, C, C Express, SS, Due west |
| Specifications | |
| Mass | 7 lbs (3.18 kg) |
| Length | 38.5" (97 cm), 42.25" (108 cm) |
| Butt length | 20" (508mm), 24" (610mm) |
| | |
| Cartridge | Current offerings: (October. 01, 2021) None No longer offered: (Oct. 01, 2021) .219 Zipper, .307 Winchester, .30-30 Winchester, .35 Remington, .32-40 WCF, .32 Special, .338 Marlin Limited, .356 Winchester, .375 Winchester, .38-55 Winchester, .44 Magnum, .410 bore Model 1895 Chamberings: .45-70, .444 Marlin, .450 Marlin Model 1894 Chamberings: .38 Special/.357 Magnum, .44 Special/.44 Magnum, .45 Filly |
| Barrels | sixteen-24 in |
| Action | Lever activeness |
| Feed system | Tubular magazine (capacity varies) |
| Sights | Atomic number 26 sights, optional telescopic, integral 1913 rail on some models |
The Marlin Model 336 is a lever-action rifle and carbine made by Marlin Firearms. Since its introduction in 1948, it has been offered in a number of different calibers and butt lengths, but is commonly chambered in .30-thirty Winchester or .35 Remington, using a twenty- or 24-inch barrel. Currently, the model with a 24-inch butt is only available in .xxx-30 Winchester. The Model 336 is currently produced past Ruger.
History [edit]
The Model 336 is a direct development of the Marlin Model 1893 rifle which was produced from 1893 to 1936.[1] [2] Based on the patents of L.Fifty. Hepburn, the Model 1893 incorporated a new locking bolt system and a 2-piece firing pivot.[ii] In 1936, with only minor changes to the stock, forearm, and sights, the Model 1893 was redesignated the Model 1936 (soon renamed the Model 36).[ii] All of these firearms featured a solid-top receiver made of forged steel and incorporated side ejection of fired cartridges.[2] Compared to the Winchester 94, then the predominant lever-activeness hunting rifle, the Model 36 was somewhat heavier with a simpler internal machinery and a full pistol grip-type buttstock in contrast to the Winchester 94'due south directly grip stock.
In 1948, the Model 36 was replaced past the Model 336, which incorporated the patents of Thomas R. Robinson, Jr., a Marlin employee.[2] Sold nether both the Marlin and Glenfield brands, the Model 336 has been in continuous production from 1948 to the present twenty-four hours, and is currently produced by Ruger Firearms under the Marlin brand. Ruger is expected to start product of Marlin rifles former 2021.
While most current variants of the Model 336 characteristic a full pistol-grip walnut stock, twenty inch barrel and full length tube magazine, other versions of the 336 accept been often offered past Marlin over the years, including barrel lengths of xvi.25-inch, 18-inch, 22-inch and 24-inch barrels, half-length magazines, and models with straight grips and/or hardwood (birch) stocks.[2]
Design [edit]
An evolution of the Model 36 rifle, the Model 336 is easily distinguished from its predecessors by its open ejection port machined into the side of the receiver. Design improvements include a stronger and simpler round-profile chrome-plated breech commodities, a redesigned cartridge carrier, an improved extractor,[3] and whorl-type main and trigger springs in identify of the flat springs used in before Marlin rifles.[two] Like its predecessors, the receiver and all major working parts of the Model 336 are constructed of steel forgings.[two]
With its solid, apartment height receiver and side ejection of fired cartridges, the Marlin 336 is prime candidate for employ with a burglarize scope. In 1956, Marlin also incorporated its proprietary Micro-Groove rifling system into the Model 336 and other centerfire Marlin rifles.[ii] This rifling system, which used an increased number of relatively shallow rifling grooves, cut down product fourth dimension and significantly extended the service life of machine tooling.[4] Co-ordinate to Marlin, the Micro-Groove system provides very uniform bore dimensions and a very smooth bore finish designed to ameliorate accurateness, foreclose gas leakage, and reduce bore fouling.[iv]
The Model 336 is designed to be easily disassembled for cleaning. Removal of the lever pivot screw with a flathead screwdriver, allows field stripping of the lever arm, bolt, and ejector for maintenance.[ii] Unlike many lever action designs, the Model 336 can be cleaned from the breech, much similar a commodities-activeness rifle.[ii] This in turn avoids impairment to the muzzle acquired by cleaning rods and tools.
Production [edit]
Every bit of 1983, the Model 336 was ranked the #2 all-time leader in U.Due south. high-powered sporting rifle sales, after the Winchester Model 1894, with over iii.5 million sold.[five]
Other models based on the Model S336 activeness [edit]
This thirty-30 Cal. Marlin rifle is engraved with scenes from American history commemorating America'due south Bicentennial.
Marauder, Trapper, Model 336Y
Marlin has made short carbine versions of the Model 336 over the years, including the Model 336 Marauder, Trapper and the Model 336Y (Y continuing for "Youth Model"). Ordinarily featuring a short 16- or 18-inch barrel, these carbines are considerably shorter and lighter than the standard twenty" carbine. The Model 336Y besides featured a brusque buttstock to enable use by younger shooters.
The Glenfield
For many years, Marlin produced a less-expensive Glenfield line of Model 336 rifles for retail at mass trade and section stores including: J.C. Penney, Sears Roebuck & Company, Western Auto, Thousand-Mart and Wal-Mart. Marlin sold these rifles every bit the Glenfield Models 30, 30A, 30AS or 30AW. Other Model 336 production rifles were stamped with names chosen by the retailer, such as the J.C. Higgins (Sears) Model 45 and Model fifty, the Montgomery Ward Western Field Model 740-A EMN, the J.C. Penney Foremost Model 3040, the 1000-Mart Model 30TK and the Model 3000 for Big 5 Sporting Appurtenances. Mechanically identical to the Model 336, these mass market rifles were typically fitted with lower-cost hardwood (birch) stocks and forearms, and some metal finishing operations were eliminated in the interest of lowering unit cost.[two] By marketing a less-expensive version of the same rifle under a different proper name to mass merchandising stores, Marlin protected its customer base of small specialty gun dealers.[two]
Store Brand Models:
By 1983, almost of Marlin's mass merchandise retailers were in a position to insist on name-brand firearms, and the Glenfield line was dropped. Withal, Marlin continued to offer a less expensive version of the Model 336, variously chosen the Model 336W or Model 30AW, originally sold only to the Wal-Mart chain. Fitted with a hardwood stock and lower-cost sights, these rifles were frequently offered as part of a special packet with an inexpensive rifle scope, sling, or other options. The Marlin Model 30AW packet included a 3-9x32 factory-mounted telescopic and padded sling, only was otherwise identical to the Marlin Model 336W.[6]
XLR Series:
Marlin as well offers an XLR line of rifles in several calibers, all based on the Model 336 lever activeness design. The Model 336XLR features stainless construction, a 24-inch butt, and a grey/black forest laminate stock.
Model 336SS
The Model 336M, a Model 336 carbine made largely of stainless steel, was introduced in 2000. It was replaced a year later by the Model 336SS, a 20" carbine offered only in .30-xxx caliber. The Model 336SS features a forged stainless steel receiver, barrel, lever, and trigger. The magazine tube, springs, and loading gate are also fabricated from stainless, while other metal parts are nickel-plated steel.
Model 375 [edit]
Introduced in 1980, the Model 375 uses the Model 336 lever action mechanism simply was chambered in the then new 375 Winchester cartridge. This model was discontinued in 1984 after around sixteen,000 were produced.
Model 336ER [edit]
Introduced in 1984 this model was very similar in advent to the Model 375 with the add-on of the cross commodities condom. This model was originally to be chambered in both the 307 Winchester and 356 Winchester. The 307 Winchester was never manufactured with only a few prototypes being made. The 356 Winchester was manufactured but merely until 1986. Just ii,441 of these rifles were ever produced and are considered a highly sought after collectors piece.
Model 444 [edit]
Introduced in 1965, the Model 444 Marlin uses the Model 336 lever action mechanism, including the signature open up ejection port machined into the side of the receiver, merely is chambered for the .444 Marlin cartridge.[two] At its introduction, the Model 444 was the almost powerful lever action rifle on the market.[2] With a cage free energy of more than 3000 ft-lb, the Model 444 was intended for the largest North American game animals.[two] The Model 444 holds 4 cartridges in the mag and one in the chamber, and was originally fitted with a 24-inch barrel and a straight grip buttstock.[2]
Early Model 444 rifles utilized a 1 in 38" rifling twist and were handicapped by a lack of suitable bullet weights. In addition, nearly all existing bullets for the .444 had been originally designed solely for use in handguns; used in the Model 444, the bullets tended to break up at higher rifle velocities. A new 265-grain bullet greatly improved the utility of the Model 444 as a hunting rifle, and other bullet weights have since been introduced. In 1971, Model 444's butt length was reduced to 22 inches, and the rifle's buttstock was changed to a full pistol-grip design.[two] Later production rifles received a alter in barrel twist to 1 in twenty inches to stabilize longer and heavier bullets.[ii]
Model 1894 [edit]
In 1963, Marlin added the .44 Magnum cartridge as an optional chambering in the Model 336T carbine, which featured a straight grip, a 20-inch round tapered butt, and a full-length magazine. However, the rifle experienced continuing problems in loading and chambering the short .44 Magnum cartridge, and in 1964 Marlin abruptly dropped the .44 Magnum selection.[ii] Marlin was well aware of continued demand for a lever-action carbine in .44 Magnum caliber, and began searching for a replacement. In 1969, Marlin introduced the New Model 1894 in .44 Magnum/.44 Special caliber.[ii] The New Model 1894 is not based on the Model 336 machinery, instead, it uses the erstwhile short-receiver Model 1894 activity incorporating the flat-profile bolt, which received minor improvements before being reintroduced in .44 Magnum caliber.[2] The determination to use the original Model 1894 action, a blueprint originally designed to accommodate pistol-length cartridges such as the .38-40 and .44-40, proved a complete success.[2] In keeping with its predecessor, the New Model 1894 was given a straight grip buttstock instead of the pistol-grip style version fitted to the Model 336.[2] Since 1979, other calibers have been introduced for the Model 1894, including .38 Special/.357 Magnum, .41 Magnum, and the .45 Colt nether the Models 1894C, 1894S, and 1894CS.[2] A cross-bolt safety was added in 1984.[2] The Model 1894 is particularly pop with cowboy activeness shooting enthusiasts, equally well as shooters who desire to carry a shoulder arm and a revolver in the same quotient.
Model 1895 [edit]
Introduced in 1972 and named in honor of the Marlin Model of 1895 (produced from 1895–1917), the current (New) Model 1895 rifle offered in .45-seventy caliber utilizes the same Model 336 receiver design and lever activity mechanism used in the Marlin Model 444.[2] [7] [8] A variant of the New Model 1895, called the 338MX and 338MXLR, has too become available in more than recent times .338 Marlin Express.[9]
.450 Marlin [edit]
The .45-70 was originally a blackness pulverization cartridge and most factory ammo is loaded moderately for rubber in older rifles, including the original Model of 1895. With increasing numbers of modern .45-70 rifles built with high force actions (including the current Model 1895, the Ruger No. i unmarried shot, the Browning BLR or the Siamese Mauser conversions), handloaders and specialty ammunition makers similar Hornady, Buffalo Bore and Garrett produce high intensity .45-70 loadings that may equal or exceed the ability of the .444 Marlin. Some approach the ability of the .458 Winchester Magnum (although with smaller bullets with a much lower sectional density) and are effective confronting unsafe game. Use of such loadings in older .45-70 firearms is dangerous and should non exist attempted; for that reason, Marlin introduced the .450 Marlin, a belted version of the .45-70 cartridge that will not sleeping room in older .45-70 rifles. However, many .45-70 Model 1895 owners chose to use the traditional .45-lxx loads for deer-sized game with the pick of using the loftier intensity .45-70 loads for more dangerous game. The 1895M lever-action rifle chambered in .450 Marlin was offered from 2000 until 2009 and is no longer in production.
Guide Guns [edit]
One contempo innovation growing in popularity is the "Guide Gun" concept. The proper name most probably originates from the types of longarms favored by Alaskan hunting and wilderness guides as a defence force against attacks past bears. The Guide Gun concept consists of a handy, brusque-barreled (usually xvi-nineteen") lever action in a large caliber such as .45-70 or .450 Marlin with a iii/four length magazine tube. Usually custom-made by a skilled gunsmith, these guns are commonly fitted with either open sights (such as ghost rings or express sights), a reflex sight, holographic sight or a long eye-relief telescopic mounted on a scout rail. Marlin New Model 1895 deportment are frequently used to build this type of firearm. In an attempt to capitalize on this trend, Marlin began offering custom versions of their New Model 1895 action starting time with the now-discontinued Models 1895SDT and 336SDT. Current "Guide Gun" models include the Models 1895G, 1895GS, 1895GBL, 1895SBL, and 1895m .
Conversions [edit]
Bated from existing Marlin models, the basic Model 336/Model 1895 receiver and lever activity machinery has enjoyed some popularity as a parent for various wildcat caliber conversions. These custom rifles are increasingly popular in the western United states, Canada, and Alaska where encounters with grizzly bears and other potentially dangerous animals can be expected. Some of these wildcat cartridge conversions include the .450 Alaskan, .457 Wild West Magnum, .50 Alaskan, and the .510 Kodiak Express.
Of the conversions mentioned both the .450 Alaskan and the .457 Wild West Magnum do non require new barrels, merely but a sleeping accommodation reaming and the required activeness modifications (referred to as "action lengthening"); the .457 magnum also allows continued ability to employ .45-70. The .510 Kodiak Express is the nearly powerful wildcat conversion available for the Marlin at 5,000+ ft-lbs.[10] Both the .l Alaskan and .510 Kodiak Limited require a new barrel to exist installed on the rifle.
The .45-90 Sharps (likewise chosen .45-90 WCF or but .45-xc) has occasionally been used in converted Marlin 1895 rifles. The .45-xc conversion involves modifications to the action that increment the commodities travel and action timing (to adjust when a round is ejected, and when a new round lifts to enter the chamber), and the chamber in the barrel is reamed to .45-90 specifications. The instance of a .45-90 is more than a quarter inch longer than the .45-70. The limitations on bolt travel of a converted Model 336 rifles are generally limit its instance overall length (COL) to 2.85 inches. The 2.85 COL allows all bullets that work with the .45-70 action to be used in the converted .45-90. The .45-90 converted 1895 actions have the same pressure level limitations as the .45-seventy actions.
Marlin 336 twelvemonth of manufacture [edit]
The following tabular array can be used to date the year of industry of a Marlin 336. It is likewise valid for determining nearly other Marlin firearm build dates from 1946 to the nowadays.
Marlin yr of industry maybe determined from the following table of alphabetic character/numeral prefixes to the serial number:
|
|
|
Starting in 1973, the yr of manufacture can be determined past subtracting the get-go two digits of the serial number from 100: Instance: SN 2512345 would have been made in 1975 [100 - 25 = 75].
Meet too [edit]
- List of firearms
- Tabular array of handgun and rifle cartridges
References [edit]
- ^ van Zwoll, Wayne. "A Lever Rifle's Lineage". Burglarize Shooter. Petersens. Retrieved October 18, 2010.
- ^ a b c d e f grand h i j one thousand l m n o p q r due south t u v w x y z aa Brophy, William S., Marlin Firearms: A History of the Guns and the Company That Made Them, Stackpole Books, ISBN 0811708772 (1989), pp. 193, 210, 216-221, 243, 252-267
- ^ United states of america Patent Function, U.S. Patent No. two,465,553, Awarding February 27, 1946: The extractor was designed by Thomas R. Robinson, Jr., a Marlin employee.
- ^ a b Fryxell, Glen E., Marlin'south Micro Groove Barrels
- ^ Wallack, LR. "Lx One thousand thousand Guns". 1983. In Gun Digest Treasury, Harold A. Murtz, editor, DBI Books. 1994 p.190 ISBN 0873491564
- ^ "Archived copy". Archived from the original on October 3, 2008. Retrieved Oct five, 2008.
{{cite spider web}}: CS1 maint: archived copy as championship (link) Model 336W — Also Bachelor with Mounted Scope - ^ Hornady (2003). "Hornady Handbook of Cartridge Reloading". vol I (6th Edition ed.). Hornady Mfg Co. p. 586.
- ^ Metcalf, Dick, Marlin'south Newest .45-70: The Model 1895SBL Archived February 6, 2009, at the Wayback Machine Shooting Times, September 23, 2010
- ^ van Zwoll, Wayne. "All Aboard the .338 Marlin Express". Rifle Shooter. Petersen'southward. Archived from the original on November 7, 2010. Retrieved October 18, 2010.
- ^ McPherson, M.50. (November 2008). "The .510 Kodiak Express the 5,000 pes-pound Marlin". Guns Mag . Retrieved Oct xviii, 2010.
External links [edit]
- Model 336
Source: https://en.wikipedia.org/wiki/Marlin_Model_336
0 Response to "How to Tell What Model 1949 Marlin 336"
Post a Comment